Products >> high temperature grease >>

PTFE grease

Online Inquiry

Product introduction:

This product is made of polytetrafluoroethylene (PTFE) thickened with special oil with high chemical stability, and added with special anti-corrosion additives.

Performance:

Extremely wide working temperature, excellent high temperature stability and oxidation stability;

The consistency changes with the temperature very little, the volatility is very low, the service life is very long;

Excellent abrasion resistance, abrasion resistance, combustion resistance, radiation resistance, corrosion resistance;

Low friction coefficient, high bearing capacity, good compatibility with most rubber, plastic;

Resistant to water, oil, vacuum (low steam pressure), most organic solvents and strong acid and alkali.

Application:

It is suitable for the lubrication and antifriction of bearings, gears, guide rails and cams, which can not be sustained by general grease at extremely high temperature and with high load.

It is suitable for the lubrication of film stretching machine bearings, heat setting machine conveyor belt bearings, corrugated paper machine bearings, hot fan bearings, drying room conveyor belt bearings, welding machine bearings, hot oil pump bearings, high temperature motor bearings;

For fixing film on fixing assembly of printers and photocopiers, lubrication of injection molding machine die thimble, drive system bearings in glass and aluminum plants.

This product has NLGI1#, 2#, 3# consistency grades.

Attention:

Containers must be cleaned with appropriate solvents to be free of impurities, moisture, oil stains and fibers.

After use, it must be tightly covered in time to avoid mixing with moisture, impurities and other harmful substances that affect the insulation performance of the product;

Should not be stored for too long, and should pay attention to dust and moisture, do not mix with other oils.

Previous Product：High and low temperature molybdenum disulfide grease Next Product：Extra high temperature grease