Professional bearing grease and high temperature grease manufacturer

What is molybdenum disulfide grease and its characteristics?

As we all know, the application range of grease is very wide, there are many varieties and brands, the performance is also very different, the difference in quality is more obvious. Different friction parts have very different requirements and quantity of grease. Therefore, we must choose it reasonably. On the one hand, we need to understand the characteristics of different greases. On the other hand, we must understand the friction parts of the mechanical equipment using grease. Operating characteristics, environmental conditions and lubrication methods, etc. If the grease can be selected correctly, it will not only reduce the amount of grease used, but also better protect the product and bring good economic benefits. So under some heavy load occasions, which kind of grease is better to use? As a molybdenum disulfide grease manufacturer who can give you the answer.

It is understood that molybdenum disulfide grease is made of synthetic base oil and molybdenum disulfide solid lubricant and anti-oxidation, anti-rust and other additives. Compared with similar competitive products, it has outstanding advantages, mainly reflected in extreme pressure wear resistance, long life, corrosion resistance, low noise, etc., which can meet the lubrication requirements of gear, shaft and other components in the environment of high load and impact load, reduce the abnormal friction loss, and provide excellent lubrication protection. This high temperature and high pressure grease is designed for lubrication of bearings and moving devices in high temperature, high load/impact load environments, providing long-lasting protection against wear and rust. Solid, semi-fluid and fluid lipids containing molybdenum disulfide have excellent lubrication properties for mechanical friction parts working under extreme pressure, but do not have good high temperature resistance.
Molybdenum disulfide grease manufacturer

The following is a brief introduction to its characteristics.

1. Good noise reduction performance, can effectively reduce the noise from plastic gear; And can be compatible with most media, such as rubber, plastic, metal, etc., so the application range is wider.

2With good low seepage characteristics, so it can be used in clean places, and the base oil is non-toxic and pollution-free, in line with environmental protection requirements, will not cause harm to human body and the environment.

3, Excellent load resistance, under low speed heavy load and impact load, can form a continuous and stable lubricating oil film, to give the components good lubrication protection. In addition, in the case of insufficient grease, solid lubricant will also remain on the surface of the component to form a protective layer.

4, excellent lubrication performance, can reduce the friction coefficient of the friction pair, reduce the friction resistance, so that the product can start faster, and lasting lubrication, so it can effectively improve the service life of the product.
Molytex grease supplier

5, good rust resistance and corrosion resistance, can effectively prevent corrosion and corrosion on the metal surface under wet operating conditions.

6, long service life, strong antioxidant capacity to ensure a long protection period, can significantly reduce the probability of parts damage and oil consumption.

7. Good thermal stability and low temperature, not easy to volatilize and deteriorate at high temperature, not easy to harden and solidify at low temperature, can make the product easy to start cold.

To sum up, MoS2 grease can avoid poor lubrication under high load and impact load conditions, and the lubrication effect is more durable and wear-resistant, which can improve the wear resistance and service cycle of parts, and ensure that the product maintains high efficiency and high performance during operation. Because each country's region and language is different, it will have different kinds of names such as: molybdenum disulfide extreme pressure grease, high temperature high load grease, high temperature resistant grease, pressure wear-resisting lubricant, high temperature heavy load bearing grease and so on.

supramoly MOS2 grease factory

Contact Us

    Name: JIA

    Tel: +86-15266060622

    Mobile: +8615266060622

    E-mail: [email protected]

    QQ: 632116426

    WeChat: 0086 15266060622

    Whatsapp: 0086 15266060622

    Add: Shanghai jiading industrial zone

    QQ: 632116426